Home > News > Industry News

What are the items of anti-theft installation in supermarkets?


1. Must not expose supermarket anti-theft devices in the sun, nor place them in places where the temperature is too high and the humidity/chemical substances corrode the lady. In order to ensure the quality of the project, first investigate the source of interference on the spot. If it cannot be ruled out, the installed supermarket anti-theft should be kept away from the source of interference.
2. The RF detector power box uses a 10A two-pole grounded plug. In order to avoid interference with other electrical appliances, an independent AC220V power supply should be used. The power socket must be a 10A two-pole grounded socket that meets the safety standards.
3. When the supermarket alarm is energized, if an abnormal phenomenon is found, the power supply must be cut off immediately, and then the power supply can only be energized after troubleshooting.
4. During the installation of the supermarket anti-theft device, do not operate it with electricity.
5. When all the connections have been connected, the installation and wiring must be checked repeatedly so that it can be powered on.
Where to install the supermarket anti-theft device
Do not install the supermarket anti-theft device within 0.5 meters of the metal door or within 1 meter of any metal object. Metal objects include metal wall bars, display shelves, metal display cabinets, metal shopping carts, etc. Do not install supermarket anti-theft devices within 2 meters of cash registers, credit card identification devices, telephones, computers, data cables, neon lights, air conditioners, and heaters.